Install busware SCC board on Raspberry Pi

To use busware SCC boards (see busware shop) with FHEM you have to: Install FHEM (see my earlier blogpost) If not already root $> sudo su – Remove all reverences of the device ttyAMA0 (/dev/ttyAMA0) from /etc/inittab and /boot/cmdline.txt (if you use a Banana Pi you should look for ttyS2) $> nano /etc/inittab and replace #Spawn a getty on […]

FHEM Installation on Raspbian

To install FHEM into /opt/fhem you have to take the following steps: Switch to root mode: $> sudo su – Get archive key and add it to system keys: $> wget -qO – http://debian.fhem.de/archive.key | apt-key add – Add reposetory to your system sources: $> nano /etc/apt/sources.list and add the following line to the bottom :deb […]