Run a DynDNS client under Raspbian

For a home automation project I have to setup a local DynDNS client on my Banana Pi running with Raspian. Here are the steps I’ve taken to run a DynDNS client under Raspbian (will work on other Debian based Linux distributions too): Install ddclient package:

This command installs the package and starts the DynDNS configuration wizard. Select […]

Get GPIO pin overview (pinout)

On Banana Pi you can call:

This should give you an pinout like that:

As you can see you also will see the current value of the pins. If BCM (@see http://raspberrypi.stackexchange.com/questions/12966/what-is-the-difference-between-board-and-bcm-for-gpio-pin-numbering) is activated it should look like that (Banana Pi Pro):